Alexander Kojevnikov | Blog

Growing mirrored and encrypted partitions in FreeNAS

UPDATE 2009-11-19: this post explains how to do the same in Debian.

I'm building a small NAS for the household. It will run FreeNAS and will be used as a file, rsync, BitTorrent and printer server. I want it to be reliable and secure so it will have two HDDs in RAID 1 (AKA mirroring) and their content will be encrypted.

But what if in the future I will want to upgrade the drives with larger ones? A common scenario with RAID 1 is to replace one of the disks with the bigger one, rebuild the mirror then replace the other one and rebuild it again. In theory it sounds like an easy process that will keep all your data intact.

In practice however it's not, Mike explains how to do it under FreeNAS in his blog. Growing mirrored and encrypted drives is a bit more complicated.

Here is how, in case you might need it:

# geli backup /dev/mirror/raid1 bak
# geli detach /dev/mirror/raid1
# geli clear /dev/mirror/raid1
# geli restore bak /dev/mirror/raid1
# geli attach /dev/mirror/raid1
# gpt recover /dev/mirror/raid1.eli
# gpt remove -i 1 /dev/mirror/raid1.eli
# gpt add -i 1 -t ufs /dev/mirror/raid1.eli
# gpt label -i 1 -l data /dev/mirror/raid1.eli
# growfs /dev/mirror/raid1.elip1

That's it, your encrypted partition should be functional now!

NOTE: always do your backups, I can make no guarantees this guide will work for you.

Published: 2009-11-04

Tags: freenas freebsd

Page 1 / 1